BQLZR Suitcase Handle Replace Parts Luggage Hand Holder Flexible 6.1inch Length Carry Handle Grip,Inner Hole Distance:16cm(6.29 inches),Outer Hole Distance:23cm(9.05 inches)(Watch Video First)
Overall length 250mm/9.84Handle length 155mm/6.1Inner hole distance: 160mm/6.29Outer hole distance: 230mm/9.05Metal mount size: 26mmx47mm/1.02x1.85 (WxL)Hole Pitch: 35mm/1.37Easy to install,you can attach them with screws.Your choice of handle replacement should be based on the hole location at the end of the handle. If you can find a handle that matches the size of the hole location, the handle will fit snugly against the housing, but allow movement to grip the handle and allow slack between your hand and the housing.It can be widely used for suitcase,luggage,supple bags, gift boxes, case carriers, home textiles, etc.Total lenght(with end caps) :about 25cm/9.84 inch, Spare Handle Strap length:about 15.5cm/6.10 inch, Handle Wide:about 2.5cm/0.98 inchCarefully pull back the liner, remove the old handle, put a flat washer on each screw to keep the bolt from going through the housing, tighten the screw, put the liner back inNote: The handle is not universal. Only suitable for replacing handles with the same hole spacing. Please check the hole spacing and other size information before purchasing. If the model is not suitable, you can refer to the previous model table to find other handles with the same hole spacing, or you can consult customer service